Kirby Morgan 77
0,00 TL
Kirby Morgan Commercial Diver's Helmet 77
Features
Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.
316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain.
Kirby Morgan Defogging Steady Flow Valve provides an additional flow of gas into the commercial diving helmet for ventilation and defogging.
Kirby Morgan Emergency (EGS) Valve supplies backup breathing gas to the diver.
Kirby Morgan Side Block Multi use side block has additional ports built in to provide controlled air flow, if needed.
Kirby Morgan Rapid Change Modular Communications System Because the module is easily removed from the commercial diving helmet, repair or replacement of communications parts is quick and trouble free. Kirby MorganRapid Change Modular Communications System is available with either a male Marsh Marine style waterproof connector or a bare wire post connection.
Whiskers Bubble deflecting whiskers keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
PullStrap has been improved with the addition of a stainless steel “D” ring. This makes for easier removal. Pull Strap also allows the assembly to easily be hung for drying.
Positive-Lock™ Latch System developed by Kirby Morgan in 1992, consists of two sealed Positive-Lock™ pull pins which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the O-ring sealed neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the commercial diver’s shoulders, thus helping to prevent any flooding of the commercial diving helmet.
Head Cushion gives the commercial diving helmet a secure, well balanced feel as well as excellent thermal protection during long work periods.
Adjustable Neck Pad: Commercial Diving Helmet attached yoke system has an adjustable neck pad which is made from a scuff resistant elastomer. In conjunction with the spring activated front neck dam ring lock. Adjustable Neck Pad provides protection for the bottom of the commercial diving helmet
Features
Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.
316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain.
Kirby Morgan Defogging Steady Flow Valve provides an additional flow of gas into the commercial diving helmet for ventilation and defogging.
Kirby Morgan Emergency (EGS) Valve supplies backup breathing gas to the diver.
Kirby Morgan Side Block Multi use side block has additional ports built in to provide controlled air flow, if needed.
Kirby Morgan Rapid Change Modular Communications System Because the module is easily removed from the commercial diving helmet, repair or replacement of communications parts is quick and trouble free. Kirby MorganRapid Change Modular Communications System is available with either a male Marsh Marine style waterproof connector or a bare wire post connection.
Whiskers Bubble deflecting whiskers keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
PullStrap has been improved with the addition of a stainless steel “D” ring. This makes for easier removal. Pull Strap also allows the assembly to easily be hung for drying.
Positive-Lock™ Latch System developed by Kirby Morgan in 1992, consists of two sealed Positive-Lock™ pull pins which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the O-ring sealed neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the commercial diver’s shoulders, thus helping to prevent any flooding of the commercial diving helmet.
Head Cushion gives the commercial diving helmet a secure, well balanced feel as well as excellent thermal protection during long work periods.
Adjustable Neck Pad: Commercial Diving Helmet attached yoke system has an adjustable neck pad which is made from a scuff resistant elastomer. In conjunction with the spring activated front neck dam ring lock. Adjustable Neck Pad provides protection for the bottom of the commercial diving helmet
Kirby
Morgan Rex® Demand Valve (patents pending), with it's full adjustment
balanced piston is a breakthrough design that exceeds all requirements
of all government or other testing agencies. It has the best
work-of-breathing performance when compared to ANY other commercial
diving helmet. This is our highest performing regulator, with the lowest
breathing resistance and best work of breathing.
Silicone Oral Nasal Mask is made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
Air Train diffuses the incoming breathing air/gas onto the face plate to defog the lens.
Kirby Morgan Helmet Bag (500-901) and Kirby Morgan Tool Kit w/Pouch (525-620) included.
Specifications
The Kirby Morgan Commercial Diving Helmet 77 has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). The Kirby Morgan Commercial Diving Helmet 77 is fully CE marked with demand valve REX.
Weight: 32.43 lbs.
Helmet Shell: Stainless Steel
Control Knobs: Polyurathane
Lens: Clear polycarbonate
Neck Dam: Neoprene. Optional latex neck dam available.
O-Rings: Buna-N
Head Cushion: Nylon bag filled with #4 Polyester foam
Recommended Lubricants: All commercial diving helmets and band masks are lubricated at the factory with Christo-Lube®. Kirby Morgan recommends Christo-Lube® or Tribolube® for all gas train components. Dow Corning®111 Silicone or equivelent may be used for commercial diving helmet and band mask components that are used with gas mixtures containing less than 50% oxygen.
Silicone Oral Nasal Mask is made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
Air Train diffuses the incoming breathing air/gas onto the face plate to defog the lens.
Kirby Morgan Helmet Bag (500-901) and Kirby Morgan Tool Kit w/Pouch (525-620) included.
Specifications
The Kirby Morgan Commercial Diving Helmet 77 has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). The Kirby Morgan Commercial Diving Helmet 77 is fully CE marked with demand valve REX.
Weight: 32.43 lbs.
Helmet Shell: Stainless Steel
Control Knobs: Polyurathane
Lens: Clear polycarbonate
Neck Dam: Neoprene. Optional latex neck dam available.
O-Rings: Buna-N
Head Cushion: Nylon bag filled with #4 Polyester foam
Recommended Lubricants: All commercial diving helmets and band masks are lubricated at the factory with Christo-Lube®. Kirby Morgan recommends Christo-Lube® or Tribolube® for all gas train components. Dow Corning®111 Silicone or equivelent may be used for commercial diving helmet and band mask components that are used with gas mixtures containing less than 50% oxygen.
Regulator Performace
The Kirby Morgan Rex® Performance: The Rex regulator on the Kirby Morgan Commercial Diving Helmet 77 offers high performance. The commercial diving regulator has been tested at Dive Lab at Panama City, Florida. The Kirby Morgan Rex® Commercial Diving Regulator meets or exceeds all current U.S. Navy and European commercial diving standards.
Cage Code: The cage code for identifying Kirby Morgan DSI products for U.S. government purposes is 58366.
CR Standards: Kirby Morgan Commercial Diving Helmets meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
CE Approved: The Kirby Morgan Commercial Diving Helmet 77 is CE Approved.
Note:
The minimum operating temperature recommended for the Kirby Morgan Commercial Diving Helmet 77 is 37 degrees F, only in regards to regulator performance. At the time of this writing, no hot water shroud is available for the Kirby Morgan Commercial Diving Helmet 77 for heating the commercial diver’s breathing gas.
Without a Kirby Morgan Hot Water Shroud, the commercial diver may be subject to hypothermia due to cold gas inspiration temperatures. Kirby Morgan makes no physiological recommendations regarding minimum safe operating temperatures for commercial divers using the Kirby Morgan Commercial Diving Helmet 77.
Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the divers exhalation coming in contact with the topside air temperature.
Recommended overbottom (OB) gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i.g.
The Kirby Morgan Rex® Performance: The Rex regulator on the Kirby Morgan Commercial Diving Helmet 77 offers high performance. The commercial diving regulator has been tested at Dive Lab at Panama City, Florida. The Kirby Morgan Rex® Commercial Diving Regulator meets or exceeds all current U.S. Navy and European commercial diving standards.
Cage Code: The cage code for identifying Kirby Morgan DSI products for U.S. government purposes is 58366.
CR Standards: Kirby Morgan Commercial Diving Helmets meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
CE Approved: The Kirby Morgan Commercial Diving Helmet 77 is CE Approved.
Note:
The minimum operating temperature recommended for the Kirby Morgan Commercial Diving Helmet 77 is 37 degrees F, only in regards to regulator performance. At the time of this writing, no hot water shroud is available for the Kirby Morgan Commercial Diving Helmet 77 for heating the commercial diver’s breathing gas.
Without a Kirby Morgan Hot Water Shroud, the commercial diver may be subject to hypothermia due to cold gas inspiration temperatures. Kirby Morgan makes no physiological recommendations regarding minimum safe operating temperatures for commercial divers using the Kirby Morgan Commercial Diving Helmet 77.
Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the divers exhalation coming in contact with the topside air temperature.
Recommended overbottom (OB) gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i.g.